Alca 0.98cm Pre-Wall Frame & Cistern, Front Actuator, (125mm Deep) WRAS Air Gap

Alca self-supporting frame for mounting wall hung WC pans with an Installation depth of 125 to 250mm, frame width 510mm x 980mm high, in front of a support wall or within a partition framed wall with a plasterboard finish and a floor thickness of 0-200mm.

Compatible all ALCA flush plates: Basic, Sensor and NIGHT LIGHT.

For toilet pans with a connecting pitch of 180mm or 230mm. Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats, shower toilets, and sprays.

Key benefits:

• Dual flush independently adjustable with hygienic reserve
• Compatible all ALCA flush plates: Basic, Sensor and NIGHT LIGHT
• Polystyrene insulation prevents condensation forming and dampens vibrations
• Installation depth 125mm
• Installation depth adjustable from 20-95mm
• Tilt the cistern for easy installation in timber frames
• Can be installed in a partition, in front of the bearing wall
• The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
• The fitted frame should be covered with a plasterboard panel
• Adjustable anchor feet and a spring-lock system, range of 0-200mm
• The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
• Suitable for installation of remote or sensor flushing
• The cistern is made of one piece, thus ensuring 100% impermeability
• Sliding rail holder for the waste connector can be set to eight positions between 0-93mm
• Water supply from the rear/top
• Angle valve with the ability to connect to the Mepla piping system
• Dispenser for WC cistern tablets included
• Maintenance work without using any tools
• Frame material: powder-coated metal

Approvals:

• Kiwa Approved
• WRAS Air Gap

• Fixings for WC pan: threaded rod 2x M12, 4x washers, 2x covers, 2x nuts, & 2x thread protectors
• Fixation set: 4x screws Ø8×60m, and 4x dowels Ø12
• Elbow waste connector HT 90/90 polyethylene, PE-HD
• 2-piece cover of the service opening is simply adjustable
• Cistern with fill and flush valve
• Waste reduction HT 90/110 polyethylene, PE-HD
• End-caps for protecting the connecting holes during installation of the system
• Set for inserting toilet tablets
• Self-supporting frame
• Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
• Drainage seal, PP connector, connector seal
• Inlet seal, PP outlet, wrapping seal

Warranty:

• 15 year manufacturer