Hydromat Double Sided Self-adhesive Butyl External Corner

A Hydromat external corner, forming part of the Hydromat self-adhesive butyl tanking system for wet rooms. An extra for the Hydromat tanking 5 and 10m² kits.

Designed for use on the external corner junction of the floor and walls. Use in conjunction with Hydromat Tanking Membrane and Jointing Tape to create a permanently flexible and waterproof junction.

Once installed it can be tiled over immediately, drastically speeding up the speed of installation.

Key benefits:

• Preformed self-adhesive butyl external corner
• Double sided to allow for lapping of the tanking membrane and jointing tape
• 120 x 120mm
• Can be tiled over immediately
• Suitable for use with underfloor heating

Installation guidance:

• Check the substrate is sound, free of contaminants and remove any loose material
• Make sure there are no significant irregularities, any gaps should be filled
• Surfaces should be primed (order separately) and allowed to dry
• Roller over all areas for maximum adhesion, before removing the top film
• Seal all edges and junctions with Butyl sealant (order separately)
• Download the PDF installation instructions, from the Installation and Help Guides "Tab" for more information.

Also available, order separately:

• 5 and 10m² Hydromat Self-Adhesive Butyl Tanking Membrane rolls
• 10m x 150mm Hydromat Self-adhesive Butyl Joint Tape
• Hydromat Double Sided Self-adhesive Butyl Internal Corners
• 1 Litre primer
• 310ml tube of Butyl Sealant

Warranty:

• When installed correctly by a competent person and used for normal Wetroom applications this tanking system has a life-of-tiling guarantee with the manufacturer (if grout lines are maintained)
• No guarantee is offered where this is not the case