Hydromat Single Sided Self-adhesive Butyl Joint Tape - 10m x 150mm

Hydromat self-adhesive butyl single sided joint tape.

Used jointing the self adhesive butyl membrane sheet on floors and walls, vertical internal corners and horizontal floor / wall junctions.

This 10m roll of Hydromat Single Sided Joint Tape can be used to supplement the Hydromat Self-Adhesive Tanking Membrane Kits available in 5 and 10m².

Key benefits:

• Self adhesive butyl membrane joint tape
• 10m length roll
• 150mm wide
• Split release backing for easier application when rolling into joints and joining sheets of Hydromat membrane (roller not included)
• Designed to be used with "Hydromat Tanking Sheet Membrane and Internal / External corners - Order separately" on walls and floors
• The Hydromat system can be tiled over immediately
• Suitable for use with underfloor heating

Installation guidance:

• Check the substrate is sound, free of contaminants and remove any loose material
• Make sure there are no significant irregularities, any gaps should be filled
• Surfaces should be primed (order separately) and allowed to dry
• Install internal / external corners (order separately)
• From the corner of the wall mark out and apply vertical joint tapes at 1000mm centres, overlapping onto the floor tape down to the floor
• Install joint tape into the corner wall / wall joint, overlapping onto the corner down to the floor
• Install joint tape into the corner floor / wall joint, overlapping onto the corner 50mm. Do not overlap onto the vertical tape
• From the wall mark out and apply joint tapes on the floor at 1000mm centres, overlap onto the floor / wall tape
• The aim is to create one continuous tanking membrane sheet (order separately) down to the drain
• Roller over all areas for maximum adhesion before removing the top film
• Seal all edges and junctions with Butyl sealant (order separately)
• Download the PDF installation instructions, from the Installation and Help Guides "Tab" for more information

Also available, order separately:

• 5 and 10m² Hydromat Self-Adhesive Butyl Tanking Membrane rolls
• 10m x 150mm Hydromat Double Sided Self-adhesive Butyl Joint Tape
• Hydromat Double Sided Self-adhesive Butyl Internal Corners
• Hydromat Double Sided Self-adhesive Butyl External Corners
• 1 Litre primer
• 310ml tube of Butyl Sealant

Warranty:

• When installed correctly by a competent person and used for normal Wetroom applications this tanking system has a life-of-tiling guarantee with the manufacturer (if grout lines are maintained)
• No guarantee is offered where this is not the case